Products
News 
Enclosures
Xirrus has developed a family of Wi-Fi Array mounting options specifically suited for various environments and applications. These covers, enclosures, and mounting kits conceal, secure, and protect Wi-Fi Arrays to deliver the performance needed for years and years of operating life.
Indoor Snap-on Cover
The XE-2500 Series Indoor Snap-on Covers provide concealment for Wi-Fi Arrays, for indoor use when you don't want the Array's face to be visible. Snap-on Covers are easily installed or removed without tools.
The snap-on cover is designed as an aesthetic cover and is not intended to protect the Array from physical tampering. The snap-on cover can easily be painted to blend in with any environment.
The snap-on cover is designed as an aesthetic cover and is not intended to protect the Array from physical tampering. The snap-on cover can easily be painted to blend in with any environment.
| Part Number | | |
|---|---|---|
| XE-2500 Snap-on Cover for XN4, XS4, and XS-3500 Wi-Fi Arrays | (50.8 x 10.2 cm) | (0.7 kg) |
| XE-2520 Snap-on Cover for XN8, XS8, XS16, XS-3700 and XS-3900 Wi-Fi Arrays | (35.6 x 7.6 cm) | (0.2 kg) |
Indoor 2 x 2 Indoor Enclosure
The XE-2020 Indoor 2x2 Enclosure is intended for indoor applications that require securing a Wi-Fi Array against physical tampering.
The key features of the Wi-Fi Array Indoor Enclosure include:
The key features of the Wi-Fi Array Indoor Enclosure include:
- Secure—provides secured, concealed, locking enclosure for an Array.
- Safe—plenum-rated metal base gives off no toxic fumes into the plenum in case of fire.
- Mounting options—may be suspended in a drop ceiling grid or mounted directly on a flat surface. Cable access is available from either top or sides. Knock-out holes are provided to accommodate a variety of cabling options.
- Convenient—fits in standard 24" ceiling tile grid.
- Arrays supported—secures any Array type: XN4, XN8, XN12, XN16
| Part Number | | |
|---|---|---|
| XE-2020 Indoor Enclosure, Ceiling Tile Drop-In or Surface Mount, 2'x2', Lockable Door. Fits all Array models | (60.3 x 60.3 x 14 cm) *Protrudes 4.5 in (11.4 cm) below ceiling | (8.2 Kg) *without product inside |
Indoor Protective Enclosure
The Indoor Protective Enclosure Mounting Kits are intended for indoor applications that require suspending a Wi-Fi Array from an exposed I-beam or wall-mounting it, while protecting it from impact in settings like warehouses and gymnasiums.
The key features of the Protective Enclosure Mounting Kit include:
The key features of the Protective Enclosure Mounting Kit include:
- Impact resistant—Durable thermoformed plastic dome protects the Array. Freedom to sway allows the I-beam mount to absorb impacts.
- Secure mounting—For the I-beam mount, a steel bracket clamps on firmly; a security chain provides an extra level of protection. For the wall-mount, the bracket is made of CRS steel.
- Simple to install—only a few common tools are required. No holes must be drilled to install the I-beam mount.
| Part Number | | |
|---|---|---|
| XE-2170-IBEAM Includes white protective cover, mounting plate, and I-beam mounting bracket. Fits XN8, XS8, XS16, XS-3700, and XS-3900 Arrays | (56 x 56 x 152 cm) | (11 kg) |
| XE-2150-IBEAM Includes white protective cover, mounting plate, and wall mount bracket. Fits XN4, XS4, and XS-3500 Arrays. | (41 x 41 x 152 cm) | (6.8 kg) |
| XE-2150-WALL Includes white protective cover, mounting plate, and wall mount bracket. Fits XN4, XS4, and XS-3500 Arrays. | (46.5 x 41 x 17.8 cm) | (5.7 kg) |
Indoor Manufacturing Rated Enclosure
The XE-2220 Indoor Manufacturing Rated Enclosure is designed to operate in harsh manufacturing environments where there are large amounts of particles in the air. This enclosure has two large filters built into the back of the enclosure to allow air in, but to filter out suspended particles such as paper, cloth, and metal filings. The enclosure is designed to hang from an i-beam
The key features of the Manufacturing Rate include:
The key features of the Manufacturing Rate include:
- Self-cleaning – Fans will alternate to clean one filter, as the other filter is being used for air intake.
- Secure mounting—enclosure is designed to pivot in case it is hit by fork lift; security chain provides an extra level of protection.
- Simple to install—only a few common tools are required and no holes must be drilled.
| Part Number | | |
|---|---|---|
| XE-2220 Factory-rated dust-proof Indoor Enclosure for manufacturing environments. Dual fans powered by PoGE plus air filters protect Array from dust and debris. Fits all Array models. Includes I-beam mounting bracket. | (137 x 38.7 cm) | (35 kg) |
Indoor Wall Mount Kit
The Indoor Wall Mount Kits are an L-bracket mount designed to mount the Wi-Fi Array on a wall or any other flat surface that is capable of supporting the Array. The wall mount comes in two sizes.
| Part Number | | |
|---|---|---|
| XS-BKT-WALL-3500 For XN4, XS4 and XS-3500 Wi-Fi Arrays. | (25.1 x 14 x 7.9 cm) | (0.7 kg) |
| XS-BKT-WALl-3900-3700 For XN8, XS16, XS8, XS-3900 and XS-3700 Wi-Fi Arrays | (39.6 x 27.9 x 7.9 cm) | (1 kg) |
Indoor i-Beam Mounting Kit
The Indoor i-Beam Mounting Kits are intended for indoor applications that require suspending a Wi-Fi Array from an exposed I-beam.
The key features of the I-Beam Mounting Kit include:
The key features of the I-Beam Mounting Kit include:
- Secure mounting— enclosure is designed to pivot in case it is hit by fork lift; security chain provides an extra level of protection.
- Simple to install—only a few common tools are required and no holes must be drilled
| Part Number | | |
|---|---|---|
| XE-2100 For XN4, XS4 and XS-3500 Wi-Fi Arrays. Includes I-beam mounting bracket and mounting plate to allow Arrays to hang from I-beam structures. | (137 x 29.8 cm) | (3.6 kg) |
| XE-2120 For XN8, XS8, XS16, XS-3700, and XS-3900 Wi-Fi Arrays. Includes I-beam mounting bracket and mounting plate to allow Arrays to hang from I-beam structures. | (137 x 38.7 cm) | (4.5 kg) |
Outdoor Protective Enclosure
The Outdoor Protective Enclosure is intended for all outdoor applications where securing any Wi-Fi Array from harsh environments is required. This enclosure offers protection from rain, heat, cold, direct sun, and wind while providing an additional layer of physical security.
The key features of the enclosure include:
The key features of the enclosure include:
- Weatherproofing and lightning protection
- Humidity = 10% to 90% non condensing
- Wind Survivability = >165 mph
- Heater for cold weather locations
- Fan cooling with filters
- RP-TNC connectors increase flexibility in antenna selection and usage
- Flexible mounting options for pole and wall mounting capabilities
| Part Number | | |
|---|---|---|
| XE-4000-AC Outdoor Protective Enclosure with AC option comes with Fan, Heater, and Lightning Protection operating on 110/220V AC power. Mounting kit (XE-4005-xxx) MUST be ordered separately. Fits all Arrays models. Rated for operation from -40°C to +55°C ambient temperature. | (61 x 61 x 36 cm) | (21.3 kg) |
| XE-4000-POE Outdoor Protective Enclosure with PoE option comes with Fan, Heater, and Lightning Protection operating on PoE power. Mounting kit (XE-4005-xxx) MUST be ordered separately. Rated for operation from 0°C to +55°C ambient temperature. | (61 x 61 x 36 cm) | (19.5 kg) |